Finding your suitable readers for regenerative blower, 3.00 hp is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for regenerative blower, 3.00 hp including detail information and customer reviews. Let’s find out which is your favorite one.
863 reviews analysed
1. XPOWER BR-252A 1-HP 1000-CFM Indoor/Outdoor Inflatable Blower, 9.8-Amp
2. Broan 363, 383 LoSone Complete Blower Assembly 115 Volt # 97006024
Broan/Nutone Replacement Parts
3. High Temperature Blower | Replaces: Dayton 1TDV4, 4YJ33 & Fasco 7090-2379, 7064-1678
Fasco Model 7090-2379; 7064-1678, (4C943 & 4YJ33 discontinued, this is the replacement). Not recommended for speed control. NOTE: Motor must be positioned in an area where the temperature does not exceed 104°F. Blower is designed to handle air temperatures up to 450°F at blower inlet.
4. Broan Heater Replacement Vent Fan Motor # 97010254/162-G, .9 amps, 3200 RPM, 120 volts
- C-Frame Motor
- 3200 RPM, 0.9 amps, 120V
- Shaft 7/32″ x 3″
- Rotation CW Shaft End
- Exact replacement motor for: 15353, 04J2063, J238-075-7151, P15353, SX17549
- 13/16″ Coil stack
- 2 mounting studs on shaft side of motor
- Warranty- All parts sold by SupplyEdge come with a 1 year, no questions asked, no hassle warranty.
This is a genuine replacement heater motor for Broan. Fits heater models: 162 G-L, 164 G-l, 9417DN-R01, 9427P-R01, 9417DN-R02, 9427P-R02. Exact replacement motor for: 15353, 04J2063, J, P15353, SX17549. Replaces 97010254.
5. Round 3.3 Inch Blower with Flange | Replaces Dayton 1TDP3, 4C443 & Fasco 50748-D500 (69 CFM)
- Direct Replacement for Dayton 1TDP3, 4C443 and Fasco 50748-D500
- 12 to 75 CFM PSC and Shaded Pole Blowers, Round Outlet
- Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life
- All-Position Mounting
- Min./Max operating Temp. Range: -20 Degree to 104 Degree F
Dynamically balanced, this blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Motors have cast aluminum end shields for greater heat dissipation and protection, resulting in less downtime and longer service life. Psc blower, forward curve, direct drive, wheel dia 3 15/16 in, cfm @ 0.000-In SP 75, voltage 115, 60 Hz, single phase, full load Amps 0.45, RPM 3016, max Inlet Temp 104 degree F, overall height 5 3/4 in, overall width 6 1/4 in, overall depth 6 7/16 in, includes discharge mounting flange.
6. Jabsco 35115-0020, 3 inch Blower, 105 CFM, 12 Volt
N. M. M. A. Type AcceptedMeets USCG Regulation 183. 410 and ISO 8846 MARINE for Ignition ProtectionComplies with ISO 9097 MARINEOpen AirFlow: 105 CFM (2. 9 m3/min)Voltage: 12 (Vdc)Amp Draw: 4. 4 (amp)Fuse Size: 6 (amp)Weight: 2. 3 (kg) 4 (lb)
7. Ryobi OEM Replacement Blower Fan for ONE+ Plus 18 Volt Blower P2108 and P21081 – 529437004, 529437003, 529437001
Genuine OEM Ryobi replacement blower fan part number 529437004. Replaces part numbers 529437001 and 529437003. Fits Ryobi 18 volt cordless blower models P2108 and P21081
8. Round Permanent Split Capacitor 3.3 Inch Blower | Replaces Dayton 1TDN7, 1C180, 4C440 & Replaces Fasco 50747-D401, 71213466
Round Permanent Split Capacitor 3.3 Inch Blower | Replaces Dayton 1TDN7, 1C180, 4C440 & Replaces Fasco 50747-D401, 71213466
9. Regenerative Blower, 1-1/2in, 3.42 HP, 3Ph
- Price For: Each Housing Material: ALuminum Max. Ambient Temp.: 104 Degrees F Inlet Size: 1-1/2″ (F)NPT Item: Regenerative Blower Motor Enclosure: Totally Enclosed Fan-Cooled Overall Length: 15-1/2″ Full Load Amps: 10.4-9.4/5.85-5.52 Thermal Protection: Automatic Overall Height: 13″ Max. Flow Rate: 106 CFM Outlet Size: 1-1/2″ (F)NPT Max. Vacuum: 140″ WC Phase: 3
- HP: 3.42 Max. Pressure: 169″ WC Voltage: 208-275/380-480 Standards: CE and CSA Overall Depth: 13-3/4″ Country of Origin (subject to change): Taiwan, Province of China
‘Regenerative Blower, Inlet Size 1-1/2 In. (F)NPT, Outlet Size 1-1/2 In. (F)NPT, 3.42 HP, Voltage 208-275/380-480, 3 Phase, 10.4-9.4/5.85-5.52 Full Load Amps, Max. Pressure 169 In. WC, Max. Flow Rate 106 CFM, Max. Vacuum 140 In. WC, Max. Ambient Temp. 104 Degrees F, Housing Material Aluminum, Motor Enclosure Totally Enclosed Fan-Cooled, Thermal Protection Automatic, Overall Length 15-1/2 In., Overall Height 13 In., Overall Depth 13-3/4 In., Standards CE and CSA’
10. Regenerative Blower, 0.37 HP, 42 CFM
- Price For: Each Standards: Class B NEMA Insulation Max. Ambient Temp.: 104 Degrees F Item: Regenerative Blower Voltage: 115/230 Overall Length: 10″ Overall Height: 9″ Housing Material: Aluminum Alloy Phase: 1 Overall Depth: 9-1/32″ Max. Flow Rate: 42 CFM HP: 0.37 Max. Vacuum: 33″ WC Full Load Amps: 3.6/1.8 Max. Pressure: 34″ WC Outlet Size: 1″ (F)NPT
- Inlet Size: 1″ (F)NPT Country of Origin (subject to change): Taiwan
‘ Regenerative Blower, Inlet Size 1 In. (F)NPT, Outlet Size 1 In. (F)NPT, 0.37 HP, Voltage 115/230, 1 Phase, 3.6/1.8 Full Load Amps, Max. Pressure 34 In. WC, Max. Flow Rate 42 CFM, Max. Vacuum 33 In. WC, Max. Ambient Temp. 104 Degrees F, Housing Material Aluminum Alloy, Overall Length 10 In., Overall Height 9 In., Overall Depth 9-1/32 In., Standards Class B NEMA Insulation ‘
By our suggestions above, we hope that you can found Regenerative Blower 300 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!