The Best Refrigerator Icemaker Stainless

Product Description

This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

Under counter Ice Maker in sleek black and stainless steel door. This unit makes up to 12 -Pounds of crescent-shaped ice per day. Compact size to fit easily under most counters and front-ventilation feature allows a true built-in application. Removable bin holds up to 6 -Pounds of ice. No drain required, but installation by a licensed plumber is required.

Product Description

The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product Description

The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.

Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

With the Whynter stainless steel built-in ice maker, we bring you the latest in professional standard innovations for the home. This ice maker makes 12 lbs of crescent-shaped in 24 hours and can store 6 lbs of ice. This built-in portable ice maker from Whynter is the perfect solution to your ice Making needs in virtually any situation. It comes in a stylish stainless steel door and sleek black cabinet that complements any modern kitchen and bar area.

This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 120 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.

The CHARD Stainless Steel Ice Maker with Water Dispenser supplies you with both ice and water in one convenient portable unit. Its unique design uses a water-cooler-style 5-gallon water jug to provide bullet shaped ice and chilled drinking water. The durable stainless steel body ensures top-quality style and features a drain plug that allows for easy draining when the unit is ready to be stored. The Chard Stainless Steel Ice Maker with Water Dispenser makes up to 40 pounds of ice per day, and makes its first batch of ice in as little as 6 minutes. Choose from three cube sizes: small, medium, or large. The removable ice bucket holds up to 3.5 lbs. of ice. The extendable water spout supplies fresh chilled water at the touch of a button. The power switch helps to provide low energy consumption which makes this ice making water dispenser perfect for the home, office or cabin. Never run out of ice while entertaining again and always have fresh chilled water at your fingertips. Includes an ice scoop and user’s manual. CHARD Products put you in control with a little help from the right tools. From meat processing, to outdoor cooking, to simple food preparation, we help you Make It Yours. Overall Dimensions: 14″ (W) x 16-1/2″ (L) x 17-1/2″ (H)