The Best Pata Ssd Laptop Drive

128GB 2.5-inch SSD from KingSpec with PATA/IDE interface. Built using MLC Flash chips, with read speeds up to 107MB/sec and write speeds up to 65MB/sec. IDE 44-pin interface and SM2236 controller.

32GB 2.5-inch SSD from KingSpec with PATA/IDE interface. Built using MLC Flash chips, with read speeds up to 105MB/sec and write speeds up to 31MB/sec. IDE 44-pin interface and SM2236 controller.

The Ableconn IIDE-MSAT let you convert an mSATA SSD into a standard 9.5mm high 2.5” IDE SSD drive. It provides excellent heat dissipation for mSATA SSD drive with the open aluminum frame design.

Specification
* Connector:
– 1 x mSATA (52-pin, Mini SATA) Receptale
– 1 x IDE (44-pin, PATA) Male

* Chipset: Marvell 88SA8052
* Data transfer rate:
– Up to 150 MB/s

* Jumper Selection:
– 1 x jumper for selection of Master/Slave/Cable Select modes

* Software:
– OS independent; No driver installation required
– Support Windows, Macs, and Linux

* Convert Full Size mSATA SSD to High Performance, No Noise, Low Power 44Pin 2.5” IDE SSD
* Supports SATA I, SATA II and SATA III (6Gbps) mSATA SSD
* Latch type mSATA connector on board, no need the screw to retain mSATA SSD
* 100% Compatible with 2.5” IDE drive mechanical spec
* 48 bits LBA can Break Capacity-Limit to Support mSATA SSD max 144,115,188GB
* Compliant with Serial ATA 2.6
* Jumper setting support IDE Master, Slave and Cable Select Modes
* Tag Command Queuing (Max 32 entries)
* ATA/ATAPI PIO mode data transfer
* ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
* ATA/ATAPI-7 Streaming feature set
* Includes 9.5mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws
* Dimension of PCBA with 2.5” frame : 98mm x 69.85mm x 9.5mm
* Fully RoHS compliant
* Made in Taiwan

Package Contents
* Ableconn IIDE-MSAT mSATA SSD to 2.5in SATA Drive Converter
* Mounting screw set (4x drive mount screws)

64GB 2.5-inch SSD from KingSpec with PATA/IDE interface. Built using MLC Flash chips, with read speeds up to 108MB/sec and write speeds up to 59MB/sec. IDE 44-pin interface and SM2236 controller.

WEme USB 3.0 to SATA/IDE hard drive converter is a perfect solution for data transfer and backup in the 2.5″/3.5″ hard drive. This item lets you swap hard drives easier than ever before as it ensures stable external connection between any 2.5″ or 3.5″ SATA Hard Drive. Using its USB 3.0 Interface, you can connect any 2.5″ or 3.5″ SATA/IDE drive to your Ultrabook Notebook Mac or PC, and experience blistering file transfers as fast as 5Gbps speed.

Product Features:
– Compatible with USB 3.0 computer systems such as Mac & MacBook & Lenovo & Dell Optiplex & Asus & Samsung ect
– Supported Drives: 2.5″/3.5″ SATA HDD/SSD, 2.5″/3.5″ IDE HDD, CD-ROM, CD-RW, DVD-ROM, DVD+RW, DVD-RW. Supports up to 10 TB drives
– Supports most models of CD/DVD-ROM/RM drives comprising of an IDE or SATA interface on the market
– On/Off Switch for HDD protection, you can be switched off when not in using
– Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector
– One-click backup feature to effectively secure precious data
– Support 2 IDE hard drives and 1 SATA hard drive connecting simultaneously. Compatible with three hard drives simultaneously!

Compatible Operating Systems:
Windows XP /Vista/7/ 8 /8.1 (32/64-bit), Win 10, Mac OS 10.10 or higher

Note:
1. OTB (One Touch Backup) function isn’t applicable for Mac OS, only be used on usb connection under Windows system.
2. When connecting to a 3.5-inch HDD/SDD, please power the product with the provided AC adapter to ensure the stable operation.
3. Some components inside this hard drive may be broken along with the aging problem, this may lead to automatically disconnected when transferring large files.

Package Content:
– 1 x USB 3.0 to SATA/IDE Adapter
– 1 x USB 3.0 Cable
– 1 x 4PIN Power Cable
– 1 x Power Adapter
– 1 x CD Driver

The USB 3.0 to SATA/IDE Hard Drive adapter enables you to transfer files up to 5 Gbps! Connect any 2.5″ and 3.5″ SATA/IDE hard drives and 5.25″ SATA/IDE CD/DVD-RW drives. Power switch to easily connect and disconnect your hard drive.This Adapter is a perfect solution for data transfers or data backup!

Features:

• Supports 2.5″ and 3.5″ SATA/IDE hard drives

• Supports 5.25″ SATA/IDE CD/DVD-RW drives

• Super-Speed USB 3.0 interface

• Plug & Play, Hot-Swappable

• LED indicator light

System requirements:

• Windows

• Mac OS

Package contents:

• USB 3.0 to SATA/IDE adapter

• Power Adapter

• Power Cord

• User Manual

Specification -:—-

Caddy Thickness :- 12.7mm
Caddy Interface :- PATA (IDE)
Hard Drive Interface :- SATA (2.5″ sata and ssd drives)
Size :- 12.6*12.8*1.27cm

Note -:—-

This Secondary HDD Caddy Adapter For PATA (IDE)TO SATA, gives you maximum storage flexibility enabling you to add a second notebook hard disk drive to any modular bay.
With the second HDD in your notebook, you have the fastest way to back-up key applications and critical data.

Compatible with -:—-

For 12.7mm Laptop (HP Dell Acer Asus Lenovo…)
IDE TO SATA 2nd HDD Caddy Tray for 12.7mm CD DVD-ROM Optical Bay
Installation method -:—-

1, Unpack the hard drive, Lift the hard drive caddy retaining latch, The Screws to the hard drive.
2, Insert the hard drive into the hard drive caddy.
3, Slide the hard drive into the connector until it locks into place.
4, Lower the hard drive caddy retaining latch until it snaps closed.

Package Included -:—-

1x 12.7mm SATA to IDE 2nd HDD SSD Hard Drive Caddy
1x Screws(Has been installed)
1x Screwdriver

Universal 12.7mm SATA to SATA 2nd Hard Drive Caddy Adapter Tray
Compatible with: DELL HP LENOVO ThinkPad ACER Gateway ASUS SONY SAMSUNG MSI Laptop

This universal Serial ATA Optical Bay Hard Drive Adapter lets you add a second hard drive to the laptop systems.
With a second hard drive, you can quickly store and back up critical data. Add this caddy to your laptop to give you another hard drive.
Simply remove your CD/DVD-ROM drive and put the Caddy (with the added hard drive) in it’s place…
This is a good working adapter and is Guaranteed.

Add a second 2.5” HDD or SSD to your laptop via the E-Modular (E-Module) Bay / optical drive bay with this drive caddy.
1. The 2nd Hard Disk Drive Caddy / Adapter to bring you new maximum data storage flexibility, with the compact portable design. Which works with 2.5″ inch 9.5mm /12.7mm Serial SATA Hard drive HDD and SSD (Solid State Drive) as well. With the second HDD in your Laptop.
2. The build-in lock screws make it easy to mount your second hard drive in the caddy.
3. The caddy is build from aluminum which makes it light, sturdy and provides cooling for the hard drive;
4. Plug & Play; Fast & Reliable connection just as the primary HDD.Fully integrated into Laptop, no cables / PSU / software driver needed.
5. Dual boot, Support installation of 2nd Operating System on the 2nd HDD/SSD and boot selection.

Condition: Brand New
Material: Aluminum
Color: Black & Silver
Remark: 12.7mm high , with Bezel/faceplate ,Screwdriver
Item Dimensions: 5”x0.37”x5”(128×9.5x127mm)
Package Dimensions: 5.7”x0.43”x5.2”(145x11x132mm)
Item Weight: 2.7 ounces
Shipping Weight: 3.5 ounces
Quality warranty: 6 months

Package Content:
1x 2nd HDD caddy for Apple macbook pro (Replacement Only),
4x hard drive screws, Hard drive NOT include
1 x Screwdriver