554 reviews analysed
1. Honeywell Ademco 5806W3 Wireless Smoke Detector
2. Honeywell 5808W3 Wireless Photoelectric Smoke/Heat Detector
- Improved Robust RF Field Strength: The distance between the detector and receiver has been significantly increased without the need for a repeater
- Smart Check: A signal is sent to the control panel when the detector requires cleaning. This allows a regular nonemergency service call to clean the detector before it goes into alarm.
- Approved UL Listings for Residential and Commercial Applications: Both residential and commercial installation requirements are met
- Additional LED Status Indicators: Identifying between alarm or trouble conditions is a snap with green and red LED status indicators. A green LED denotes a normal condition while the red LED indicates abnormal conditions.
- Easy to install Mounting Base: The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports which accommodate drywall anchors for easy surface mounting.
3. Notifier FSP-851 Intelligent Photoelectric Smoke Detector/Sensor Head
4. Honeywell – 5193SD – Smoke Detector, Photo, Vplex
5. Honeywell SiX Two-Way Wireless Technology Smoke Detector
6. Honeywell – 5193SD – Smoke Detector, Photo, Vplex by HONEYWELL INTRUSION
7. Honeywell Notifier FSP-851R Intelligent Addressable Detector W/ Flashscan
The Notifier FSP-851R Photoelectric Smoke Detector Head is a low-profile intelligent photoelectric sensor, remote test capable. Suitable for use with the DNR Duct Smoke Detector Housing. Notifier 851 Series Intelligent plug-in detectors are compatible for use with all Notifier Intelligent Fire Alarm Control Panels. Notifier 851 Series detectors can be used to replace the 751 Series plug-in detectors for legacy applications. COMPATIBLE INTELLIGENT BASES: — B210LP Standard U.S. flanged low-profile mounting base. — B710LP Standard replacement flanged low-profile mounting base. — B501 Standard European flangeless mounting base. — B200S Intelligent, programmable sounder base — B200SR Intelligent sounder base – Replaces B501BH series bases in retrofit applications. — B224RB Plug-in System Sensor relay base. — B224BI Plug-in System Sensor isolator detector base. NOTE: All base types require an electrical backbox which is at least 1.5" (3.81 cm) deep. These smoke detectors are in new condition.
8. NOTIFIER CO FST-851 Heat Detector, 135 F, Fixed Temperature, W/FLASHSCAN, 6.5 MA, 15-32 VDC
9. NOTIFIER CO FAPT-851 FLASHSCAN ADDRESSABLE Devices , ACCLIMATE Intelligent Photo Thermal Detector; with FLASHSCAN
Notifier FAPT-851 – Intelligent Photo and Termal Detector
10. Honeywell – 5193SDT – Smoke Det, Photo, Thermo, Vplex
By our suggestions above, we hope that you can found Honeywell Commercial Smoke Detector for you.Please don’t forget to share your experience by comment in this post. Thank you!