908 reviews analysed
Rank
Product Name
Score
1. GE Push Button In-Wall Digital Countdown Timer Switch, 5-15-30 Minute and 1-2-4 Hour Presets, On/Off, NO Neutral Wire Required, for Lights, Exhaust Fans, and Heaters, Décor Wall Plate Included, 15318
Feature
- Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Timer is great for use with lights, exhaust fans, and heaters. Compatible with incandescent, CFL and LED bulbs
- Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour. On/Off push button also allows you to turn the wired device ON or OFF without an end time
- Blue LED indicator lights show last used preset (blinks every 20 seconds). LED lights will stay on when wired device is ON without an end time
- Includes a single décor wall plate and fits most single or multi-gang rocker plates
- Easy direct wire installation
- DOES NOT require a neutral wire (Ground wire IS REQUIRED). Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, 1/4 HP
2. GE Enbrighten Z-Wave Plus Smart Fan Control, Works with Alexa, Google Assistant, 3-Way Compatible, ZWave Hub Required, Repeater/Range Extender, Black, 35544
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more.
- SIMPLE FAN CONTROL – Operate, schedule and create custom scenes for your ceiling fan wirelessly with a smartphone or voice commands when connected to a compatible hub. The smart device is specifically designed to control the speed of up to two identical fans and cannot be used for lighting. However, lights on fans featuring three wires – typically red, black and white – as well as line and ground wires can be controlled by a separate GE-branded Enbrighten Z-Wave Smart Switch or Dimmer in the same wall box.
- 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device.
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The fan control is capable of controlling indoor or outdoor ceiling fan speeds for whole-home automation and repeats the Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes black, white and light almond paddles (wallplate not included). Operating temperature range 32-104 degrees Fahrenheit.
Description
Color:Black
Manage your home’s comfort with the GE-branded Enbrighten Z-Wave Plus In-Wall Smart Fan Control. When paired with a compatible hub, the hardwired smart control operates and adjusts the speed of ceiling fans through individual commands and programmed settings. Wirelessly control the fan’s schedule and speed for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, HomeSeer, Vera, Nexia and more.
3. Lutron Maestro Countdown Timer for Fans or Halogen and Incandescent Bulbs, Single-Pole, MA-T51-WH, White
Feature
- For use with Incandescent and Halogen bulbs only. Saves energy by automatically turning off a fan or light
- Use with exhaust fans to reduce moisture, mold and mildew in bathrooms. Use with lighting to ensure lights are never left on for a long period of time
- Control up to 3-Amp fan or up to 600-Watts of incandescent halogen bulbs
- minimum requirement of 0.3-Amps or 40-Watts
- Tap on to start timer, touch rocker to adjust countdown time
- Includes (1) Maestro Countdown Timer
- coordinating wallplate sold separately
Description
Color:White
From the Manufacturer
The Maestro countdown timer by Lutron is the ideal energy-saving control for any room with an exhaust fan or light. Set the timer to turn off your fan or lights automatically after five to 60 minutes. Softly lit orange LEDs indicate the time remaining before it turns off. A great application for this timer is your bathroom. Ideally, exhaust fans should run for 10 or 15 minutes after a shower to reduce mold and mildew growth. By replacing your current on/off switch with a Maestro countdown timer, your fan will automatically turn off and never be left on by mistake. You can also use the Maestro countdown timer in your garage to keep the lights on as you get into your vehicle and it will turn off automatically after you leave. Save energy by using in closets, attics, basements, and other low-traffic areas to ensure the light is never left on for a long time. Its coordinating Claro wall plate (CW-1-WH) is sold separately.
4. Intermatic TMHDT101 T101 Electromechanical Timer, 125 V, 40 A, 1-23 Hr, 1-12 Cycles Per Day
Feature
- N/A
- Made in USA and Imported
- Ideal for loads up to 40-ampere resistive from 120-volts providing direct 24 hour time switch control of most loads
- Designed for industrial, commercial and residential applications
- This series provides from 1 to 12-inch on and offs operations daily with minimum on and offs times of 1 hour
- Comes timer with metal case 120-volt
- Container’s measures 8-1/9-inch length by 5-2/5-inch width by 3-2/7-inch height
- Industrial, commercial and residential applications
- Highest HP ratings in the industry up to 40 amps
- Direct 24 hour control
- Provides 1 to 12 On/Off operations
- Equipped with one “On” and one “Off” tripper
Description
Style:120v
Product Description
The heavy duty mechanical time switch is designed for industrial, commercial and residential applications. Features a high horsepower rating that is ideal for loads up to 40 amps resistive from 125-volts and direct 24-hour time switch control of most loads. All models are equipped with one “ON” and one “OFF” tripper. The unit contains a 1-circuit standard On/Off Single Pole Single Throw 40 Amps, 4000 watt capacity, 125 volts.
From the Manufacturer
Designed for industrial, commercial and residential applications. Highest HP ratings in the industry for loads up to 40 amps, providing direct 24 hour control of most loads. Provides 1 to 12 “On/Off” operations each day with minimum On/Off times of 1 hour. All models equipped with one “On” and one “Off” tripper.
5. Leviton LTB60-1LZ Decora 1800W Incandescent/20A Resistive-Inductive 1HP Preset 10-20-30-60 Minute Countdown Timer Switch,White/Ivory/Light Almond
Feature
- 4 Presets: 10-20-30-60 minutes
- Simple press and hold override timer function
- Can be used for lighting, heat lamps, hot tubs, attic and exhaust fans
- Installation instructions included and 3-way only works with Vizia + Remote – VP0SR (sold separately)
- White assembled on device, ivory and light almond included. (colors may vary)
6. GE Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Compatible with Alexa, SmartThings, Wink, Zwave Hub Required, ON/OFF Control, Repeater/Range Extender, 3-Way Ready, 46201
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
- ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. Up to four add-on switches can be connected to the same device.
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation = and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.
7. GE Enbrighten Z-Wave Plus Smart Light Dimmer with QuickFit and SimpleWire, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, 46203
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
- ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation and brightness adjustment from the dimmer. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation and brightness adjustment from the dimmer. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent
- 300W LED/CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit.
Description
Color:White & Light Almond | Style:Dimmer (2nd Gen.)
Set the scene with the GE-branded Enbrighten Z-Wave In-Wall Smart Dimmer with Quick Fit and Simple Wire. When paired with a compatible hub, the hardwired smart dimmer operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, Home Seer, Vera, Nexia and more.
8. Smart plug, Gosund Mini Wifi Outlet Compatible with Alexa, Google Home & IFTTT, No Hub Required, Remote Control your home appliances from Anywhere, ETL Certified (4 piece)
Feature
- COMPATIBILITY: Works flawlessly with Alexa, Google Assistant & IFTTT. No hub required. Requires Android 4.4 or above & IOS 8 or above.
- AROUND THE GLOBE: No matter where you are, turn on/off home electronics. Manage up to 50 electronic appliances – one electronic appliance per smart plug.
- FEATURES: Set timer, share with family members or create schedule. These features will make your life easier and smarter.
- INSTALLATION & ROI: Plug in the Smart Plug, download app & follow very easy steps. Effective use of smart plugs helps reduce electricity bills.
- CERTIFICATION & WARRANTY: ETL certification ensures complete protection. If you face any technical issue, feel free to us, we will try our best to help you. With Gosund smart plug gets 12-Month limited warranty.
9. Honeywell Z-Wave Plus On/Off Smart Light Switch, In-Wall Paddle, Interchangeable White & Almond |Built-In Repeater & Range Extender | ZWave Hub Required – SmartThings, Wink, Alexa Compatible, 39348
Feature
- WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES– Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Schedule timed events for connected devices and customize scenes for day or night, home or away – Switch can also be operated manually
- REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT.
- ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). CANNOT connect directly with ECHO PLUS or other Alexa products (Only ZigBee products can connect directly to Echo Plus).
- IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – replace your existing switch in as little as 15 minutes. Works with all LED, CFL, halogen and incandescent bulbs, and other devices.
- INCLUDES CHANGEABLE PADDLE COLORS – includes white and light almond paddles to match any home décor. Features a blue LED indicator light to locate the switch in a dark room. Wall plate is NOT INCLUDED.
10. GE Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Ready Toggle, 46202
Feature
- VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more.
- ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. For increased convenience, the optional toggle backlight provides a soft glow and can be reversed, turned off or always on based on your indicator preferences.
- VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12728 or 46200. Up to four add-on switches can be connected to the same device.
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wallplate not included. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.
Conclusion
By our suggestions above, we hope that you can found Ge Zwave Fan Timer for you.Please don’t forget to share your experience by comment in this post. Thank you!
