574 reviews analysed
1. GE Grounding Toggle Switch, 3-Way, In Wall On/Off Fan & Light Switch Replacement, 15 Amp, Great for Home, Office & Kitchen, UL Listed, White, 54172
Feature
- Repair or Replace – Fix old or broken toggle switches in your bedroom, kitchen or work space
- 3-Way – For use with permanently installed lighting fixtures controlled by one or two switches
- Colors – Available in white and light almond to best complement your existing wall plate
- Do It Yourself – Complete instructions included in packaging for quick and easy, step-by-step installation
- Terminal screws accept up to No. 12 AWG copper wire and Pressure Lock push-in terminals accept No. 14 AWG solid copper wire only
2. GE In-Wall Mechanical Countdown Timer Switch, Spring Wound, Up to 60 Minutes, No Neutral Wire Needed, Ideal for Lights, Exhaust Fans, and Heaters, LED 15305
Feature
- Spring-wound timer counts down to shut off at desired time. Up to 60-minute countdown at 1-minute intervals.
- Ideal for use with lights, exhaust fans, heaters, pumps and other appliances.
- Easy to install – NO NEUTRAL WIRE needed. Directly wire this timer into a standard light switch (standard toggle or decorator plate)
- Includes metal wall plate. Incandescent, CFL and LED compatible.
- Electrical Ratings: 125VAC, 50/60 Hz: 20 A Res. /Gen. , 6 A Tungsten, 1 HP. 250VAC, 50/60 Hz: 10A Res. /Gen. , 2 HP. 277VAC, 50/60 Hz: 10 A Res. /Gen.
Description
Product Description
GE 60-Minute Countdown Timer, In-Wall Mechanical Switch, Spring Wound, Up to 60 Min, Auto Shut Off, No Neutral Wire Needed, Ideal for Lights, Exhaust Fans, and Heaters, 20A Heavy Duty, 15305
From the Manufacturer
This indoor in-wall auto shut-off spring wound timer is easy to install and easy to use. Just turn the dial to stay on up to 60 minutes. Fits any standard size wall plate. Use with lights, exhaust fans, heaters and pumps. Counts down to shut off at the desired time.
3. GE Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 26931
Feature
- ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required
- Alexa device and hub sold separately)
- Wirelessly trigger scenes and send alerts when motion detection has turned lights on or off. Remotely monitor with any mobile device (Requires Z-Wave gateway or controller)
- Multiple Operation Modes: Occupancy – auto ON/auto OFF, Vacancy – manual ON/auto OFF, Manual – manual ON/OFF. 3 Sensitivity Levels – low, medium, high
- Requires in-wall installation with hard-wired connections – Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included)
4. Leviton LTB60-1LZ Decora 1800W Incandescent/20A Resistive-Inductive 1HP Preset 10-20-30-60 Minute Countdown Timer Switch,White/Ivory/Light Almond
Feature
- 4 Presets: 10-20-30-60 minutes
- Simple press and hold override timer function
- Can be used for lighting, heat lamps, hot tubs, attic and exhaust fans
- Installation instructions included and 3-way only works with Vizia + Remote – VP0SR (sold separately)
- White assembled on device, ivory and light almond included. (colors may vary)
5. C by GE 4-Wire Motion Sensing Switch Dimmer for Smart Bulbs- Works with Alexa + Google Home Without Hub, Single-Pole/3-Way Replacement On/Off Toggle, White
Feature
- A SMART SWITCH FOR EVERYBODY IN THE HOUSE: The C by GE Smart Light Switch comes with a dimmer so you can control your lights through the mobile touch app or voice assistant.
- C BY GE SMART LIGHT SWITCH DIMMER: Get convenience and comfort with your smart bulb and LED dimmer switch always being ready to respond. With enhanced functionality like out of home control and scheduling, you will never come home to a dark house.
- BUILD YOUR SMART HOME WITH SMART BULBS THAT WORK WITH ALEXA/ GOOGLE HOME: The C by GE Smart Bulbs and the Smart Switch Dimmer work with voice and app control at all times, even when the wall switch is turned off.
- MAKE TRADITIONAL LIGHT BULBS SMART BULBS: The C by GE dimmer switch allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices.
- A SMART DIMMER SWITCH FOR LED LIGHTS AND MORE: Set scenes to match your mood by simply using the LED dimmer switch with mobile app compatibility or voice assistant to control brightness level. Also works with incandescent, halogen, and CFL bulbs.
Description
The C by GE Smart Switch-Motion Sensing and Dimmer adds smart bulb functionality to traditional bulbs and keeps smart bulbs smart. The smart Wi-Fi switch works as dimmer switch and enhances traditional bulb functionality with motion sensing, out-of-home control, scheduling and scene setting. With motion sensing and ambient light detection, set lights to turn on or off based on natural light and motion in the room. When C by GE Smart Bulbs are installed, the smart switch allows app or voice control even when power is turned off at the switch. Pair the Smart Switch with C by GE Smart Bulbs in other fixtures like table lamps and control your all your lights in the room from one wall switch. C by GE Smart Switch wirelessly connects with other C by GE Smart Switches so you can control the same light fixture from multiple switches without a travel wire, even if the switches are on different circuits. Simple DIY set up. The Smart Switch connects directly with Google Home and Alexa devices without a hub required. Neutral wire–usually a white or gray wire–is required.
6. GE Push Button In-Wall Digital Countdown Timer Switch, 5-15-30 Minute and 1-2-4 Hour Presets, On/Off, NO Neutral Wire Required, for Lights, Exhaust Fans, and Heaters, Décor Wall Plate Included, 15318
Feature
- Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Timer is great for use with lights, exhaust fans, and heaters. Compatible with incandescent, CFL and LED bulbs
- Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour. On/Off push button also allows you to turn the wired device ON or OFF without an end time
- Blue LED indicator lights show last used preset (blinks every 20 seconds). LED lights will stay on when wired device is ON without an end time
- Includes a single décor wall plate and fits most single or multi-gang rocker plates
- Easy direct wire installation
- DOES NOT require a neutral wire (Ground wire IS REQUIRED). Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, 1/4 HP
7. Lutron Maestro Countdown Timer Switch for Halogen and Incandescent Bulbs, 5-Amp Light/3-Amp Fan, Single-Pole or Multi-Location, MA-T51MN-WH, White
Feature
- Timer allows exhaust fan or light to turn off automatically after running for five to 60 minutes
- Use with 3A general-purpose or exhaust fans, incandescent bulbs, or halogen bulbs up to 600-Watts
- Multi location-neutral required
- Full-on setting available to override timer
- Installs in as little as 15 minutes-just like a standard switch
Description
The Maestro Countdown Timer is the ideal energy-saving control for any room with an exhaust fan or light. Set the timer to turn off your fan or lights automatically after 5 to 60 minutes. Softly lit LEDs indicate the time remaining before it turns off with a one minute warning. A great application for this timer is your bathroom. Ideally, exhaust fans should run for 10 or 15 minutes after a shower to reduce mold and mildew growth. By replacing your current on/off switch with a Maestro countdown timer, your fan will automatically turn off and never be left on by mistake. You can also use the Maestro countdown timer in your garage to keep the lights on as you get into your vehicle and it will turn off automatically after you leave. Save energy by using in closets, attics, basements and other low-traffic areas to ensure the light is never left on for a long time. It works in single pole applications, where the lights or exhaust fan is controlled from one switch. You can also use this countdown timer with a companion switch (MA-AS- or MA-MSC-AS-) for multi-location applications. Coordinating Claro wallplate is sold separately.
8. TOPGREENER In-Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, 4A, 500W, Single Pole, Neutral Wire Required, TSOS5-W, White, 2 Pack
Feature
- 2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room
- AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
- Max Sensor Coverage Area 707 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%
- Occupancy sensor light switch features variable time delay from 15 sec (test mode) to 30 min
- *PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING*
Description
TOPGREENER TSOS5-W Passive Infrared In-Wall Motion Sensor Light Switch, you can enjoy great savings and convenience with lighting control. When you put the slide switch button to AUTO mode, TSOS5 PIR motion sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time. Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes.
Passive Infrared, PIR sensor detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. This occupancy sensor has a maximum coverage area up to 707 sq. ft., 180-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement.
With Top Greener’s TSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on in the day time even when motion is detected.
Use the TSOS5 as occupancy motion detector sensor, or set it to be in manual OFF or ON mode just like your standard ON/OFF.This operation can be done easily by sliding the sliding switch on the front of the motion sensor. TOPGREENER’s TSOS5 motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more!
Specifications: CFL/LED: 150-Watt @ 120 VACIncandescent/Halogen: 500-Watt @ 120 VAC Fluorescent: 500-Volt Amp @ 120 VACMotor: 1/8HP @ 120 VAC Coverage: 180 degrees, 707 square feet
Single-Pole use only Neutral wire required
9. Sonoff TH10 Remote Home Temperature and Humidity Monitoring WiFi Smart Switch for Home Automation System,Works with Alexa&Google Assistant(Without Sensor)
Feature
- Smart remote control switch: You can check your home appliance status anytime & anywhere, and control them on/off with just a click on your smart phone or tablet. It’s no limit to the distance.
- Set time schedules for automatic control: It has single, repeating, and countdown timers that you can use to control home appliance on/off automatically.
- Set smart scenes to control devices by Temp. & Hum: Working with Sonoff temperature & humidity sensor (AM2301, DS18B20), Sonoff TH10/TH16 can detect the real-time temperature & humidity of the environment and set up a temperature/humidity condition to control connected home appliance, even the ones connected with other Sonoff products, such as Sonoff, Sonoff RF, Sonoff SV.(Note: the sensors are not in the package of Sonoff TH10 /TH16 )
- Works With the Google Home Assistant: Link “Smart We Link” on Google Home app, start to voice control your Sonoff devices on Google Home.
- Works with Alexa: Link “eWeLink Smart Home Fan” skill. You can directly ask Amazon Echo/Echo Dot/Amazon Tap to turn on/off your Sonoff devices.
Conclusion
By our suggestions above, we hope that you can found Ge Humidity Switch for you.Please don’t forget to share your experience by comment in this post. Thank you!
