Top 10 Ge 60 Amp 8 Circuit Box

Product Description

The Reliance Controls PB50 NEMA 3R Power Inlet Box is an outdoor/watertight electrical inlet for a 50 Amp CS6564 generator cord. It is designed to be located outdoors where the generator is running to prevent dangerous carbon monoxide fumes from the generator from entering your house. This inlet box is then safely hardwired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors. It is designed to be wired directly to the transfer switch or panel by using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back). The exclusive patented design provides generous wiring space and facilitates rough-in. The face of the box is removable for easy placement and wiring. It is constructed of steel with rugged, anti-corrosive powder-coat paint and has a spring-loaded inlet cap to prevent moisture front entering the front-mounted connector inlet when not in use.. Since 1909, Reliance Controls Corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories. Reliance Controls Corporation specializes in the manufacturing of a wide variety of electrical products. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

Amazon.com

The Reliance Controls 50 Amp power inlet box is designed for outdoor use and can be hardwired directly to Reliance Controls transfer switches or panels, eliminating need for cords running through windows or doors. This rain-tight, rust-proof unit works with generators working at 12,500 watts. Using one of the four combination 1/2-inch and 3/4-inch knockouts (one on each side, bottom and back), the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space. The face of the box is removable for easy placement and wiring. It is cUL 1008 listed and covered by a 5-year warranty.

Product Description

Code-gauge steel enclosure. Single phase, 3 wire, solid neutral, 8 spaces and 16 circuits maximum 1-pole, 4 QP breakers maximum 2-pole, 120/240 volt. 10,000 AIR. One piece plated aluminum bus bar. 100 percent circuit breaker twistouts. Positive load side circuit breaker hook rail. Suitable for use as service entrance equipment when a main breaker (125 amp maximum) is back-fed in branch position and used with main breaker retainer clip No.MBR1. When used as service equipment, any unused neutral position may be used for equipment grounding. Rotate entire device 180 degrees for bottom feed. Gray enamel finish. 12-3/8″ x 14-3/4″ x 3-7/8″. UL Listed, complies fully with NEC and UL requirements for Class CTL.

From the Manufacturer

Siemens 8 space, 16 circuit, Main Lug Load Center is 125 Amp rated and intended for Surface mount applications. This enclosure is indoor rated.

Product Description

For Use With Siemens Q Series (Qp Series) Circuit Breakers 3 Wire 120/240VacAluminum Bus Made in: United States Dimensions: 1 X 1 X 1Brand: Siemens Item Weight: 3.6includes: Unit Instruction Guide

From the Manufacturer

Siemens circuit breaker enclosure is rated at 60 Amps max and will accept a variety of breaker options. Two single pole breakers, one double pole breaker, or four 1/2-inch frame breakers with a total Amperage of 60 Amps. The enclosure is outdoor rated. Breaker not included.

Product Description

The Square D QO 150 Amp Main Breaker 30-Space 30-Circuit Convertible Indoor Plug-on Neutral Load Center for Plug-on Neutral breakers is UL listed for residential, commercial and industrial power distribution. This load center is built with a shielded, copper bus bar that is plated for reliability. QO load centers are tested and listed only for QO circuit breakers. QO load centers are the “World’s Finest” designed with industry leading features for flexible application. QO load centers include features engineered for fast installation and wire savings.

From the Manufacturer

WARNING: This product can expose you to chemicals including Lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The MC0816B1200ESN is a 200 Amp rated meter-load center combination rated for use in utility areas that require the EUSERC standards be followed. A 200 Amp main breaker is installed along with a 8 space, 16 circuit interior. The interior has feed thru lugs that allow the panel to feed a load center downstream. An additional main provision rated up to 50 Amps is also provided (breaker not included) for an additional load separate from the 200 Amp main breaker. The enclosure is surface mount, NEMA 3R (outdoor) rated and is fabricated from Galvanized steel with a baked on polyester powder coating finish. The meter cover is ring type and the ring is provided. The panel is rated for overhead or underground feed applications. For overhead feed, use the Electric enter “RX” class of hubs (EC38594, EC38595, EC38596, EC38597, EC38598, EC38599, or EC38600). For bottom feed applications, use Electric enter “HC” class of hubs (ECHC200, ECHC250, ECHC300).

Product Description

Siemens introduces PL Series Load Centers – a new high quality and feature-rich line of load center products to meet applications for virtually every need. The PL Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PL load centers feature the patented insta-wire neutral/ground system, convertibility, copper bussing, and mounting tabs on the trim – these features were specifically engineered to decrease installation time and increase flexibility.

From the Manufacturer

Siemens PL series of Load Centers is a premium, feature rich design. The Load Center is single phase, 120/240 Volt, 8 space, 16 circuit and is provided with a factory installed 200 Amp Main breaker, an outdoor rated enclosure, and Copper Bus Bars. Feed thru Lugs are provided for easy connection to a sub panel. There is no need to purchase ground bars as they come standard in the PL series of Load Centers.

Product Description

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty and ships in a plain white recyclable box.

Amazon.com

The Reliance Controls Corporation 6-circuit 30 Amp transfer switch is a complete turn-key kit with everything needed to make a professional transfer switch installation in a home or office. It is designed to enable the wiring system of the building to accept the full power of a portable generator, which can run multiple electrical appliances and devices during a power outage. Use this transfer switch for up to 7,500-watt generators equipped with NEMA L14-20 or L14-30 power outlets. The kit includes a 30A 6-circuit prewired loadside reliance transfer switch with wattmeters; 30 Amp outdoor power cord inlet box, a 30 Amp 10-foot generator power cord with L14-30 ends, and an extra L14-20 cord end for smaller generators. This unit is cUL1008 listed and is covered by a 5-year warranty.

Product Description

Outdoor main lug load center, 100 amp, 6 space 12 circuit. NEMA type 3R enclosure with a rainproof cover. Aluminum bus bar, accommodates standard QO or QO tandem circuit breakers. ANSI Certified and UL Listed.

From the Manufacturer

WARNING: This product can expose you to chemicals including Lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Main Breaker; 120/240 Vac; 60 Ampere; 8 Maximum Circuit(S); 4 Maximum Space(S); Interrupting Rating 10 Kiloampere; Main Wire Size 8 To 2 Awg (Aluminum/Copper); Enclosure Size Designation 4; Size 8.88 Inch W X 3.8 Inch D X 12.57 Inch H; Qo Model