599 reviews analysed
1. MCIGICM FR-4 Copper Clad PCB Laminate Circuit Board, Single Side, 4 x 2.7 inch (10Pcs)
Feature
- This Copper Clad Plated Printed Board is desgined For Etch Etching Project.Single Sided (SS) Blank Copper on the Front, FR4 Bakelite on the Back.10 pcs a Pack.
- With Small Size 7×10 cm – 2.7″ x 4″ (W*L), 1.6mm – 0.062″ Thickness, Weight in 15g 0.5oz Each.10 pieces epoxy Brown 4 x 2.7 inch
- Packed with Moisture Protecting Bag to Prevent Copper Rust. 10pcs Bare Boards Kits Delivered in their Best Conditon.
- Single-Sided Cuttable Fiber Glass and FR-4 Flame Resistant Good for Etch, Electrical, Power DIY IoT prototyping proto Projects.
2. Penta Angel 10pcs Double-Side Prototype PCB Universal Printed Circuit Board Universal PCB Circuit Board (2x8cm)
Description
100% Brand new and high quality
2x8cm/0.79×3.15inch Double-Side Prototype Board, Lot of 10 PCS.
Thickness : about1.6mm
Grid :about 0.1inch (2.54mm)
Hole diameter : Approx.1.0mm
Dimension:Approx.2x8cm/0.79×3.15inch(W*L)
Material:glass fiber
Quantity:10pcs
All holes are plated through
Both sides are identical
Package Included:
10x 2*8cm Double-Side Prototype PCB Board
3. ALLDREI 100 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering Compatible with Arduino Kits
Feature
- PCB Board: 30 pieces double sided PCB prototype boards in 4 sizes, Double sided board with plated-thru holes allows components to be easily soldered to either side of the board
- 3 Types of Header Connector: 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header
- pitch: 0.1’/2.54mm, single row and straight connector
- 2 Types of Terminal Blocks: 5 pieces 2.54-308-2P and 5 pieces 2.54-308-3P
- Pitch: 0.1’/2.54mm
- Jumper caps: 30 pieces standard 2.54mm pin spacing circuit board jumper cap
- 100 % SATISFACTION GUARANTED: General purpose prototyping circuit board for analog and digital use
- With pre-tinned plated holes
- Extra accessories to make life easy for you (Screw Terminal Block and Headers)
Description
Components Features:
PCB Board features and info:
– 10 pcs 2 x 8 cm (168 solder points) with a matrix of 6 by 28 Plated Through Hole (PTH)
– 10 pcs 3 x 7 cm (240 solder points) with a matrix of 10 by 24 PTH
– 5 pcs 4 x 6 cm (280 solder points) matrix of 14 by 20 PTH
– 5 pcs 5 x 7 cm (432 solder points) matrix of 18 by 24 PTH
★ ★ Header Sockets
– 10 pcs 1 x 40 Pin Male Header Pin
– 10 pcs 1 x 40 Pin Female Header Pin
– 10 pcs 1 x 40 Pin Right Angle Male Header Pin
Pitch 0.1’/2.54mm; pin length 11.5mm / 0.45′;
★ ★ Jumper Caps
– 30 pcs Jumper caps
★ ★ Terminal Blocks
– 5 pcs 2 Pole Terminal, (2.54-2P)
– 5 pcs 3 Pole Terminal, (2.54-3P)
★ Electrical Specification
Rated Voltage: 150V/AC; Rated current: 6A; Contact Resistance: 20m Ohm MAX; Insulation; Resistance: 5000M Ohm/1000V; Dielectric Strength: 1250V/1 min
★ Mechanical Specification
Temp range: -40F ~ +105C; Torque: 0.1 Nm; Wire range: 26~18AWG; MAX Soldering: +250C for 5 Sec; Strip length: 4.5mm; Pitch 0.1’/2.54mm Terminal blocks; Poles: 2P, 3P
★ Part and Material
Screw: M1.5 Steel Zinc plated; Wire guard: Brass, Ni plated; Pin header: Brass, Tin plated; Housing: PA66, UL94V-0
4. ZIIDOO 15 Pcs Copper Clad Laminate PCB,FR4 Circuit Prototype Board,Single Sided DIY Prototyping PCB Board(4×2.7 inch)
Feature
- This Copper Clad Plated Printed Board is desgined For Etch Etching Project.Single Sided (SS) Blank Copper on the Front, FR4 Bakelite on the Back.
- Great for building a prototype of an electronic circuit, single side copper PCB
- Package content: 15 x Copper PCB Board.
- Mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate.
- Packed with Moisture Protecting Bag to Prevent Copper Rust.
- Single-Sided Cuttable Fiber Glass and FR-4 Flame Resistant Good for Etch, Electrical, Power DIY IoT prototyping proto Projects.
Description
Specifications:
* Product Name: PCB Copper Clad Board
* Dimension : 100x75mm / 3.94×2.95 inch(L*W)
* Material : FR4 Glass Fiber; Copper
* Thickness : approx 1.5mm
* Color: Copper Tone
Package content:
15pcs x Copper PCB Board
Conclusion
By our suggestions above, we hope that you can found Ge Wb27x21026 Pcb Main Asm for you.Please don’t forget to share your experience by comment in this post. Thank you!
