Top 10 Honda 65 Hp Motor

Lifan offer industrial grade OHV engines that are quiet and provide dependable performance. All Lifan engines are built to meet and exceed industrial grade quality standards, true 1600 hours engines with cast iron sleeves, automotive grade rods, pistons, rings, crankshafts, cam shafts, and other internal parts. These replacement engines can be used for many applications including but not limited to pressure washers, air compressors, trenchers, concrete mixers, concrete saws, mortar mixers, go-karts and more.

The Honda 196cc GX200 Series horizontal engine produces 9.1-pound-Feet (12.4 Nm) at 2,500 rpm net torque. Completely redesigned for 2011, the new GX200 offers lower noise levels, lower vibration, and lower emissions – without sacrificing power output or performance. And the new GX200 essentially matches the dimensions of the previous model, so no modifications to existing equipment designs are necessary. The GX200 features fuel efficiency and high output operation Honda means proven reliability with features like oil alert, carburetor chamber coating and carburetor filter help to protect against fuel impurities, cast iron cylinder sleeve, dual element air cleaner and fuel valve. Always easy to use and maintain with the simple throttle control, large fuel tanks, large automotive type fuel cap, dual oil drains and fill, easy, convenient, heavy duty control box, and easily accessible spark plug. Easy, reliable starting every time with heavy duty recoil starter, ergonomic, easy to grip recoil rope design, and automatic mechanical de-compression system. This engine is emissions compliant, CARB and EPA certified. Engine Type: Air-cooled 4-stroke OHV. 68 by 54 mm bore and stroke. 196 cm3 displacement. Net Power Output: 5.5 HP (4.1 kW) at 3,600 rpm. Net Torque: 9.1-pound-Feet (12.4 Nm) at 2,500 rpm. PTO Shaft Rotation counterclockwise (from PTO shaft side). Compression Ratio: 8.5:1. Butterfly carburetor. Transistorized magneto ignition system. Recoil Starter starting system. Splash lubrication system. Mechanical governor system. Dual element air cleaner. Oil Capacity: 0.63 US quart (0.6l). Fuel Tank Capacity: 3.3 US quarts (3.1 liters). Fuel: Unleaded 86 octane or higher. Dry Weight: 35-pounds. (16.1 kg). Common applications: Pressure washers, commercial lawn and garden equipment, tillers / cultivators, generators, construction / industrial equipment, agricultural equipment, small vehicles, water pumps.

Replacement Honda GX200 6.5 HP Long Block Engine Crankcase with Cylinder Head ValvesFits: Honda GX200 6.5HPIncludes: Engine Block with Piston and rings, Piston Pin, Connecting Rod, Crankshaft, Crank Seals, Crankcase Cover, Camshaft Balancer, Shaft, Low Oil Sensor, Governor, Oil Dipstick/Fill CapTop Quality OEM Replacement Parts

This auction is for 1 brand new complete 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine Torque Converter with all hardware necessary to mount.

Important Note: Included is the unique engine bolt kit for predator engines and the correct anti vibration pilot washer. Predator engines have a shoulder at the crank that is off by which cause the driver to rub on the back plate and misalignment of the belt; We provide extra piece of hardware to fix the problem. (no other kit on the market provides everything needed to fit a 212cc predator engine).

This kit comes with either a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

Bullet Lines torque converter is an asymmetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments. 

Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

Engine compatability:  Predator 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine.

Specifications:

This genuine 208cc Briggs & Stratton single cylinder engine offers dependable power for your equipment needs. With a power rating of 9.50 gross torque, this engine features a premium dual clean air filtration system and maintenance-free Magnetron electronic ignition. With a manufacturer limited warranty of 2 years consumer use / 90 days commercial use, Briggs & Stratton provides power that you can trust. This engine includes a Dura-Bore cast iron cylinder sleeve for extended life. This engine includes an installed muffler. This engine includes a fuel tank.

Here is the DEDC Centrifugal Clutch 3/4 Bore 12T, Go Kart Clutch Bike Clutch for Predator 212 CC Mini Bike Fun Kart Honda GX160 GX200, Up to 8 HP Chain Model 35 Why do you need a centrifugal clutch replacement? 1 Optimize kart or bike starting 2 Make shifting gears easier and smoother, without damaging 3 Prevent damage from over-pressure on powersports transmission part 4 Reduce torsional shock Technical Parameter: 12 tooth Horse Power up to 8 HP Chain Model #35 Inner Bore 3/4” Keyway 3/16” Engagement Speed 2000±100 RPM Clutch Height 54.5mm Outer Diameter 107mm Works with 15 inch tires. Perfect for: Go Kart, Mini bike, Fun Kart, Honda GX160 Honda GX200 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc, Nearly all 5.5 HP clones Nearly all 6.5 HP clones Nearly all 4-7HP motors, all brands.

Lifan Power USA’s 6.5MHP (Maximum Horsepower) industrial grade OHV engine is EPA certified, extremely quiet and dependable and is covered with our 1 year Commercial/Rental and 3-year residential use limited warranty policy.  This 6.5MHP 196cc engine has a 0.75-in output shaft, 6:1 gear reduction, 4-stroke single cylinder OHV gasoline engine, manual recoil start, 0.95 gallon fuel capacity and low oil shutdown protection.

Fits 16100-ZH8-W61,16100-ZH7-W51
Fits Honda GX160 5.5HP GX200 6.5 HP Engine
Fits Honda GX140 GX168 Engine

Package Include:
1 carburetor
1 air filter
3 gasket
1 insulator
1 fuel filter
1 tank joint filter
1 spark plug
1 ignition coil
1 oil sensor
1 three cable switch

Muffler Exhaust Assembly with Heat Shield Compatible with Harbor Freight Predator 212cc 6.5HP 69730 R210-111