Top 9 Shark Tool Nail Puller

Product Description

Hand-Sharpened, Double-Tempered Chromium High Carbon Steel Blade Will Bite Into Any Part Of Nail Including Headless Nails. 9″ Long.

From the Manufacturer

Pneumatic nails often have weak heads, but SharkGrip nail pullers pull from the shank. The tool’s hardened “V” takes a positive bite into the nail’s shank for easy removal. The puller’s curved underside easily slides under an embedded nailhead or onto the nail’s shank. The back of the puller doubles as a striking head for your hammer. SharkGrip Nail pullers removes even embedded, headless, or rusted nails. An advanced tempering method in the drop forged construction process of this nail puller gives it extra durability to prevent chipping or bending. 9 in. for Finish Nail (1-1/4 in. to 2-1/4 in.) and Staples.

Product description

All SharkGrip nail pullers and prybars are forged from the finest heat-treated Japanese alloy steel; the nail-pulling and prying ends are double-tempered for added strength. The pulling “V” is hardened to a Rockwell 50-52 hardness, then hand-finished for accuracy. The resulting tool is so strong it can even bite into hardened and stainless steel nails. SharkGrip nail pullers pull from the shank of the nail, not the head. SharkGrip Japanese “cat’s paw”-type nail pullers have been the choice of professional cabinetmakers and woodworkers for years because they’re so effective and easy to use. They easily dig into wood to catch even headless nails. Especially with the proliferation of pneumatic nailers, it’s essential to have a genuine SharkGrip nail puller in your tool kit. 6-1/4″, for finish nails (2-5 penny) and staples.

From the Manufacturer

SharkGrip Nail pullers removes even embedded, headless or rusted nails. An advanced tempering method in the drop forged construction process of this nail puller gives it extra durability to prevent chipping or bending. 6-1/4 in. for Finish Nail (1 in. to 1-3/4 in.) and Staples

Product Description

This Pry Bar And Nail Puller Is Made With High-Quality Hardened Steel Alloy And The Thinnest Blade Available On The Market. It Will Pry Into Any Tight Spot With Ease, Doing Less Damage To Wall And Molding Surfaces. The Curve Of The Blade Is Designed To Lift Molding Easily With A Turn And Is So Sharp It Removes Any Nail, Even Very Small And No-Head Nails, Lodged In The Wall Or Any Other Material. Made With Chromium High Carbon Steel And The Thinnest Blade Available. Wide Blade Yields Less Damage. 8″ Long.

From the Manufacturer

This pry bar and nail puller is made with high-quality hardened steel alloy and the thinnest blade available on the market. It will pry into any tight spot with ease, doing less damage to wall and molding surfaces. The curve of the blade is designed to lift molding easily with a turn and is so sharp it removes any nail, even very small and no-head nails, lodged in the wall or any other material.

Product Description

All Sharkgrip Nail Pullers And Prybars Are Forged From The Finest Heat-Treated Japanese Alloy Steel; The Nail-Pulling And Prying Ends Are Double-Tempered For Added Strength. The Pulling “V” Is Hardened To A Rockwell 50-52 Hardness, Then Hand-Finished For Accuracy. The Resulting Tool Is So Strong It Can Even Bite Into Hardened And Stainless Steel Nails. Sharkgrip Nail Pullers Pull From The Shank Of The Nail, Not The Head. Sharkgrip Japanese “Cat’S Paw”-Type Nail Pullers Have Been The Choice Of Professional Cabinetmakers And Woodworkers For Years Because They’Re So Effective And Easy To Use. They Easily Dig Into Wood To Catch Even Headless Nails. Especially With The Proliferation Of Pneumatic Nailers, It’S Essential To Have A Genuine Sharkgrip Nail Puller In Your Tool Kit. 14-1/8″, For Finish Nails (10 Penny And Up), Common Nails (6-16 Penny), And Ring Shank Nails.

From the Manufacturer

An advanced tempering method in the drop-forged construction process of our top quality high-carbon steel Nail Puller gives extra durability to prevent chipping or bending. For those big nails and spikes. Superior for duplex concrete form nails. Hardened steel handles gun nails including ring shank and stainless steel with ease. This is the big powerful nail puller for those tough jobs.

Product Description

Shark grip Nail Pullers Remove Even Embedded, Headless Or Rusted Nails. An Advanced Tempering Method In The Drop Forged Construction Process Of This Nail Puller Gives It Extra Durability To Prevent Chipping Or Bending. 11 In. For Finish Nail (2 In. To 3 In.), Common Nail (2 In. To 3-1/2 In.) And Ring Shank.

From the Manufacturer

SharkGrip Nail pullers removes even embedded, headless or rusted nails. An advanced tempering method in the drop forged construction process of this nail puller gives it extra durability to prevent chipping or bending. 11 in. for Finish Nail (2 in. to 3 in.), common nail (2 in. to 3-1/2 in.) and ring shank.

Product Description

All Sharkgrip Nail Pullers And Prybars Are Forged From The Finest Heat-Treated Japanese Alloy Steel; The Nail-Pulling And Prying Ends Are Double-Tempered For Added Strength. The Pulling “V” Is Hardened To A Rockwell 50-52 Hardness, Then Hand-Finished For Accuracy. The Resulting Tool Is So Strong It Can Even Bite Into Hardened And Stainless Steel Nails. Sharkgrip Nail Pullers Pull From The Shank Of The Nail, Not The Head. Sharkgrip Japanese “Cat’S Paw”-Type Nail Pullers Have Been The Choice Of Professional Cabinetmakers And Woodworkers For Years Because They’Re So Effective And Easy To Use. They Easily Dig Into Wood To Catch Even Headless Nails. Especially With The Proliferation Of Pneumatic Nailers, It’S Essential To Have A Genuine Sharkgrip Nail Puller In Your Tool Kit. 10-1/4″, For Finish Nails (6-10 Penny), Common Nails (6-16 Penny), Joist Hanger, Drywall, And Roofing Nails.

From the Manufacturer

Another great all around size nail puller. ¿Cats paw¿ design pulls even embedded or rusted nails. Will handle common, box and finish nails up 16 penny (3-1/2¿).

Estwing’s popular 14 in. Japanese pattern design Pro-claw nail pullers are made with fine tool steel, drop forged and tempered for extra durability. Chrome finish and comfortable blue cushion grip. Both nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shape and rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places. For use in nail removal right angled for removing embedded and headless nails

Product Description

8.5 oz. Solid titanium bar with open truss design. Patented Dimpler feature creates a recess around the nail head allowing the claws to slide underneath, thereby reducing the chance of chipping The wood. The clawbar is 5 times stronger than steel bars and has 10 times less recoil shock and 45% less weight. 2 sets of claw tips and strike plate last longer than steel with no mushrooming, rolling, cracking, or tearing. 12″. The product is manufactured in Taiwan.

From the Manufacturer

The Stiletto TICLW12 ClawBar titanium nail puller is sure to change nail-pulling. The ClawBar gives you super-strong prying power with less recoil shock than standard steel bars. It’s comfortable to hold and made of lightweight solid titanium to lighten your bags and reduce user fatigue.