Top 9 325 Inch Dash Disc

Six pieces 3.25″ x 3.25″ Piezo Tweeter High-quality tweeters that provide an immediate and precise response to any transients in the original signal Compatible with any impedance – No crossover required High-grade black plastic construction Great look and awesome sound Flush mount design Frequency: 4K – 20KHz Impedance: 4 – 8 Ohm 30 watts Peak power (each)

The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.

Worried that your suction cup mount will damage your dash?
Your GPS and other devices are essential while driving. However, mounting pedestals can be sticky, and when placed on textured or soft dashboards, can be a cause of concern. It is recommended to use an adhesive mounting disk to ensure that your dash won’t be damaged or be left with residue once you decide to remove it.

The same goes for your suction mobile holder. Mounting your device allows you to easily and conveniently view your phone on your dashboard or even your windshield. It is best to keep these flat surfaces blemish-free by using an adhesive mounting disk.

With Crossery Adhesive Mounting Disk, you can keep your dash protected!

Universal for any 70mm smartphone, car camera or GPS suction mount, this disk adheres to the dashboard while your suction cup mount adheres to the disk. With a much larger size than your suction cup, you can ensure a secure fit.

Now, you can mount your suction mounting pedestal, including your mounting pedestals for Garmin and TomTom GPS device, to your car’s dashboard or windshield for easy viewing.

Still not convinced? These other benefits will help you decide:

? This car accessory fits any 70mm mount securely, so your pedestal won’t fall off.
? The strong adhesive ensures that your device will not drop even if it is placed on your windshield.
? The disk is compact and doesn’t take up much space on your dashboard.
? It is a practical gift for friends and family. After all, who does not have a mobile phone?
Keep your dashboard and windshield protected. Add Crossery Adhesive Mounting Disk to your cart TODAY!

The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. Applicable Arkon mounting pedestal models include CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the extra-strength adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) WARNING: Use caution and discretion when adhering APVHB20 to your car dashboard or other flat surface. This disk uses 3M VHB adhesive, which is designed to be a PERMANENT solution. Use of this disk may result in permanent adherence to the selected surface. Professional strength solvents or tools may be helpful in removing the adhesive. Arkon is not responsible for any damage caused to your vehicle or other surface due to the installation of this mounting disk. Adhesive disks with a semi-permanent bonding strength (Model AP036 -70mm, Model AP013 -80mm, Model AP020 -90mm) are available from Arkon. For an extra-strength 80mm disk to use with 70mm suction mounts, see Arkon Model APVHB13.

Crest the waves while enjoying your music with the BOSS Audio MGR450B Weatherproof Gauge Mech-Less (No DVD/CD Player) Digital Media Player. Turn on the Weather Band/AM/FM radio, hook up your smartphone or MP3 player through the Auxiliary input or plug into the USB port to charge or play USB-connected devices. Bluetooth technology lets you stream audio apps like Spotify and Pandora. Change up the sound with the Preset built-in EQ. With an IPX Rating of 6, state-of-the-art weatherproofing materials and special UV protection coatings, the MGR450B resists corrosion and is protected from the elements. Keep your tunes flowing with the Boss Audio MGR450B.

For further product details, please scroll down.

The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.

This product helps protect the wall from damage to the door handle, while reducing the impact of noise, care of sleep in the family .
(Large round features: arc design, the middle thickness is 0.315 “(8MM), edge thin 0.039” (1MM), can effectively eliminate the impact of the door handle. On the one hand to play the purpose of saving materials and costs, on the other hand, thin edge of the design, so that this product will not be easily deducted from the wall down, greatly extending the service life.)

Product Specifications:
Material: soft rubber
Color: Large round white
Diameter: 3.54 inch(9CM)
Thickness: middle is 0.315 inch / 8MM, edge thin 0.039 inch /1MM
Mortar: strong adhesive
Applicable temperature: -94℉-536℉ / -70 ℃ -280 ℃
Applicable wall: glass, wallpaper, wood, tiles, metal, lime wall, etc
Scope: closet door, desk, toilet cover, bedroom, bathroom, kitchen, refrigerator, cabinets, drawers, cabinets and so on
Package includes: 2PCS door knob wall shield + 2PCS powerful adhesives (if not sticky enough, it can assist in increasing viscosity)

How to use:
1. Clean the wall first;
2. Tear the protective paper ;
3. Find the door lock corresponding to the wall position, press it several times and then can use.

Precautions:
A. Wet and Dusty wall adversely paste, you can first clean and keep dry.
B. When the temperature is low, you can use the blower to preheat the glue face and then paste it.
C. When removing the self-adhesive backplate, be careful not to remove the adhesive layer.
D. After the glue sticks, please press it several times and then use it again.

The iSaddle Rotating Car Mount Dashboard Disk has a simple, sleek and discrete design to compliment the interior of any vehicle. Effortlessly transform your dashboard into a “glass-like” surface to make it compatible with most windshield-style car mounts, GPS device mounts and any other similar device mounting systems. No tools are required to install – simply adhere to the dashboard using the strong adhesive base and your Dashboard Disk is ready to go. Equipped with a full 360 degrees of rotation, allows for optimal viewing adjustments for all drivers. Once you find that perfect viewing angle, one simple press of a button will lock the Dashboard Disk into place to keep it from moving while you’re on-the-go. With a strong-hold, adhesive base and a durable design the iSaddle 360-Degree Rotating Car Mount Dashboard Disk is the perfect addition to your vehicle.

Non-Adhesive Suction Cup Mounting Disc for suction cups up to 3.25 inches in diameter.