786 reviews analysed
1. General Electric THQL21100 Thick Series 2-Pole 100-AMP Circuit Breaker
Description
Product Description
GE, 100a, double pole circuit breaker, 240V, bulk. The product is good to use. Manufactured in china.
From the Manufacturer
This 120/240-Volt GE 100 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding sub-feed panel boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.
2. Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
Description
Product Description
Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
From the Manufacturer
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
3. P1224B1100CU 100-Amp 12-Space 24-Circuit Main Breaker Load Center
Feature
- Single phase 100 Amp main breaker load center with 12 spaces/24 circuits
- Features Siemens patented insta-wire technology which allows for quick and easy installation because screws are already backed out, ready for wire insertion on ground and neutral bars
- Copper bus
- All devices are provided with 2 factory installed ground bars
- Mounting tabs on the trim hold the load center in place freeing up both hands to drive the trim screws
4. UBIZ0250-New Zinsco RC3850 Replacement. Two Pole 50 Amp Thin Series Manufactured by Connecticut Electric.
Feature
- Replacement Zinsco circuit breaker manufactured new by Connecticut Electric
- For use in Zinsco circuit breaker panels
- Intertek ETL Listing to UL Standard 489 for US and Canada-Molded case circuit breakers
- 10,000 AIC
- 50 Amp
- 120/240 VAC 2 Pole breaker in 3/4″ body
- Plug in type
- May also be branded as Sylvania (ie, Sylvania RC 3850)
Description
Product Description
Connecticut Electric manufactures new high quality replacement circuit breakers for Zinsco load centers that accept Zinsco RC style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers, never used or refurbished ones.
From the Manufacturer
This 120/240 volt Zinsco 50 amp, double pole, thin series replacement circuit breaker is used in a Zinsco load center. Typical applications, up to 8,800 watts, include electric baseboard heat, fan forced heat and 240 volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.
5. Q2125 125-Amp Double Pole Type QP Circuit Breaker
Feature
- Double pole, 125 Amp, 240V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
6. Q230 30-Amp Double Pole Type QP Circuit Breaker
Feature
- na
- Imported
- Double pole, 30 Amp, 240V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
The Parallax ITEQ230 Double-Pole Circuit Breaker is a type QP plug-in. HACR SWD. Rated. 120/240VAC 10,000 AIC. Dimensions: 2.56″ H x 2″ W x 3″ L.
From the Manufacturer
Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.
7. GE THQL2120GFT Plug-in Mount Type THQL Feeder Self-Test Ground Fault Circuit Interrupter 2-Pole 20 Amp 120/240 Volt AC
Description
GE THQL2120GFT Plug-In Mount Type THQL Feeder Self-Test Ground Fault Circuit Interrupter 2-Pole 20 Amp 120/240 Volt AC
8. MP115 15-Amp Single Pole Type MP-T Circuit Breaker
Feature
- Single pole, 15 Amp, 120V type MP-T Circuit Breaker
- 10,000 AIC interrupting rating
- Murray type MP-T circuit breakers provide easy plug-in connections in Murray enclosures and the time saving insta-wire feature
- Compatible with Murray rock solid load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Murray plug in circuit breakers are intended for use in Murray load centers or meter combinations. The single pole Murray breakers may be used in single or 3-phase load centers and are 120V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required.
9. Q220 20-Amp Double Pole Type QP Circuit Breaker
Feature
- na
- Imported
- Double pole, 20 Amp, 240V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.
10. Square D by Schneider Electric QO2020CP QO 2-20-Amp Single-Pole Tandem Circuit Breaker
Feature
- Square D QO
- 20A Single Pole Tandem Circuit Breaker
- 1/2 Space Per Pole
- 120/240V, For Older Model Load Centers Without Pan Rail Slots
- QO 2-20 Amp one-pole tandem replacement circuit breaker
- Offers 2 poles in the space of 1 as the replacement breaker is for use in old-style, non-class CTL QO load centers and has a maximum load of 240 volts
- The breaker features Qwik-Open and a Visi-Trip indicator to easily identify a tripped breaker
- Trip thermally (in an overload situation) or magnetically (under a short circuit situation)
- Quick make – quick break mechanism
Description
Square D by Schneider Electric Square D QO, 20A Single Pole Tandem Circuit Breaker, 1/2 Space Per Pole, 120/240V, For Older Model Load Centers Without Pan Rail Slots, Bulk.
Conclusion
By our suggestions above, we hope that you can found 30Amp 220 Ge Breaker Series B for you.Please don’t forget to share your experience by comment in this post. Thank you!
