We spent many hours on research to finding 3 phase 10 hp motor, reading product features, product specifications for this guide. For those of you who wish to the best 3 phase 10 hp motor, you should not miss this article. 3 phase 10 hp motor coming in a variety of types but also different price range. The following is the top 10 3 phase 10 hp motor by our suggestions
663 reviews analysed
1. LAPOND SVD-ES Series Single Phase VFD Drive VFD Inverter Professional Variable Frequency Drive 1.5KW 2HP 220V 7A for Spindle Motor Speed Control(VFD-1.5KW)
Feature
- This is single phase VFD with 1 phase 220V INPUT and 3 phase 220V OUTPUT,the power is 1.5KW, 220V,2HP,7A, VFD Dimension: 100 x 117 x 150 mm (L x W x H)
- IMPORTANT NOTE: Updated version that AI1 terminal are available,says safely add external potentiometer. The VFD ONLY work with 3 phase 220V asynchronous motors.
- Application: Spindle Motor, Drill Press, CNC,HVAC,Lathe, Milling,Pumps,Conveyors,Mach3,Fan,Cooling,Compressor,other three-phase asynchronous motors.
- This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter
- Warranty: 1 Year replace or refund!
- Due to the VFD product is a flexibly configurable device , you are welcomed to consult with our CS make best choice for your exact application.
2. LAPOND High Performance VFD Inverter VFD Drive 10HP 7.5KW 220V 32A,Variable Frequency Drive for Motor Speed Control,V8 Series(7.5KW)
Feature
- This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,only work with three phase asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor’s or contact sales for model selection suggestion.
- This new series has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency
- work well with CNC controller, say Mach3 controller, support fast accelerate/deccelerate with external optional braking resistor and external potentiometer.
- Rich of digital and analogy control terminals for versitile control , optional MODBUS (RS485) extension, well controlled fans produce low acoustics noise.
- Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other speed control machines.
- We are the original factory,any technical issues do not hesitate to contact us
- Warranty: 1 year!
Description
This Series has better performance stability and adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency,We are the original manufacturer£¬welcome to consult with us!
Parameters
Suitable Motor:< 7.5kw(11hp)="">
Model: V8 2S 7R5GB
Power: 7.5KW 10HP 220V
Input: 1PH AC220V¡À15% 50Hz / 60Hz
Output: 3PH AC0-220V 32A 0-400HZ
Package include: 1xVFD;1x English User Manual book
Features
¡ñHigh startup torque and Excellent low speed stability;Strong overload capability.
¡ñAdvanced calculous PID closed-loop arithmetic, quick responding speed and high suitability.
¡ñRich of AI & I/O port, RS485 communication port, well work with Mach3 controller.
¡ñEasy PLC function can realize 16 legs of speed and inverter control function.
¡ñSupports various encoders such as differential encoder,open-collector encoder,resolver and UVW encoder.
¡ñSupports three control modes,sensorless vector control(SVC),closed-loop vector control(CLVC) and V/F control.
¡ñSupport add External braking resistor(1000w ≥ 16Ω) and potentiometer(recommend 10K).
¡ñBroad voltage working area, normal running in 304V-456V.
¡ñAuto voltage regulation (AVR) technique, for ensuring the inverter load capability.
¡ñVarious control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes.
¡ñDead-time compensation and auto torque slip compensation function, can realize 180% high orque output at low frequency 0.25Hz.
¡ñUnique EMC design, can minimize inverter’s pollution to power.
¡ñOverall reinforcement layer to suit all kinds of harsh environment.
3. Variable Frequency Drive, MYSWEETY AC 220V/2.2KW 3HP 12A VFD Inverter Frequency Converter for Spindle Motor Speed Control (1 phase INPUT and 3 phase OUTPUT)
Feature
- This is single phase VFD with 1 phase INPUT and 3 phase OUTPUT,the power is 2.2KW, 220V,12A, VFD Dimension: 130 x 103 x 200 mm (L x W x H)
- Input voltage: 220V(+/-15%)
- Output voltage: 220VAC
- Input frequency: 50/60 Hz
- Output frequency: 0-400 Hz
- Input phase: 1 phase
- Output phase: 3 phase.
- Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other machines!
- Due to the VFD product is a flexibly configurable device , you are welcomed to consult with our CS make best choice for your exact application.
- Simple to operate and wire, convenient for you to use. Warranty: 1 Year replace or refund!
4. New WEG 1.5HP Electric Motor Fan Pump Compressor General purpose 56 frame 3430 rpm 1 phase 115/230VAC
Description
1.5 hp – 56 Frame – 3430rpm – Single Phase – 115 / 208-230volt – 5/8″ shaft diameter – 1.874″ shaft length Please see attached Pics for motor dimensions and frame dimensions Technical Info: Horsepower: 1.5 Amperage: 8.40 fl amps at 230v Phase: One / Single Phase 2 pole Voltage: 115 / 208-230 RPM: 3430 Torque: 2.27lb.ft Base: Reinforced fixed base Frame: 56 Shaft Diameter: 5/8″ Keyed shaft Shaft Length: 1.874″ Rotation: Reversible CW or CCW Rotation Frequency: 60hz Service Factor: 1.00 @ 230v Enclosure: ODP Open Drip Proof (internally fan cooled) Construction: Rolled Steel Overload: Yes – Manual reset button Efficiency: (100%) 68.0 Weight: 40 lb
5. Vector Control CNC VFD Variable Frequency Drive Controller Inverter Converter 220V 7.5KW 10HP for Motor Speed Control HUANYANG GT-Series (220V, 7.5KW)
Feature
- IMPORTANT NOTE: ●this VFD is ONLY applicable to three phase asynchronous motor ●If your motor is heavy load, pls choose a higher horsepower vfd than your motor’s or contact sales for model selection suggestion.
- Input：1 or 3 phase 220v . Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz
- With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.support fast accelerate/deccelerate with external optional braking resistor and external potentiometer.
- Application:Machinery winding machine,mixer,extruder,slitter,winder,compressor,ventilator,pump,grinder,conveyor,elevator,centrifuger and other speed control machines.
- If there are problems in use after you receive,please don’t give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one .
6. Digital Phase Converter for 7.5HP, Range:7.5hp-10hp, Input: 1ph 220V, Output: 3ph 220V, Amps: 30A, Hertz:50-60Hz, 6pc/U
Description
※FEATURES OF 3 PHASE MOTOR Compared with 1 Phase Motor ■ Low failure rate ■ Small size ■ High efficiency ■ Affordable price NOTICES ■ This product shall be used only for 3 phase 220V motor. ■ Use only a motor which suits the capacity range of this product. (1:1) ■ If the motor overheats, check whether the current is correct as shown on the motor nameplate. (Within 85% of rated) ■ Only DPS check the voltage is the output voltage 2 phase and the output voltage 3 phase when the only motors movable ■ If you use a motor for a large load condition, use the D.P.S product with one rating higher. Do not use it with higher than one rating. (This may cause motor failure.) ■ Motor brake must be of single phase only (A brake for 3 phase does not work). ■ For control cables, use U.W cable only (Electromagnetic switches, brake, magnet, etc.) SPECIFICATIONS APPLICATION RANGE : 3 phase 220V motor type RATED VOLTAGE : 3 phase 220V ± 10% HOW TO CONVERT : Relay control circuit for three-phase driving AMBIENT TEMPERATURE : -10 ~ 50℃ AMBIENT HUMIDITY : Within 95% ENCLOSURE : Open type (IP54) INSULATION RESISTANCE : 100MΩ or higher based on 500VDC MEGA WITHSTANDING VOLTAGE : For 1 minute at 1500VAC 50/ 60Hz between power supply terminal and external terminal : POWER CONSUMPTION : Within 85% of motor rated current APPLICATIONS ■ All products driven by 3 phase motors ■ All motors for industrial and domestic purpose ■ Hoists ■ Compressors ■ Conveyor motors ■ Agitators ■ Food processing machines ■ Hydraulic motors ■ Cutters, etc. ※These products can be connected for use quickly and easily everywhere.
7. Goodman/Janitrol Condenser Motor 1/6 hp 1075 RPM 208-230V Century # OGD1016
Feature
- Price For: Each Hz: 60 Motor Service Factor: 1.00 Stud Size: #8-32 Mounting Stud Pattern: 3-5/8″ x 3-5/8″ Phase: 1 Manufacturers Warranty Length: 1 yr. Motor Sub Application: Direct Dr Fan/Blower Motor Application: HVAC/R Motor Enclosure Design: Totally Enclosed Air-Over Item: Direct Drive Blower Motor Motor Thermal Protection: Auto Motor Design: Permanent Split Capacitor
- Shaft Dia.: 1/2″ Standards: UL Recognized (E46412), CSA Certified (LR43341) Capacitor Required: 2MDV4 No. of Speeds: 1 Nameplate RPM: 1075 Max. Ambient Temp.: 40 Degrees C HP: 1/6 Length Less Shaft: 3-7/8″ Full Load Amps: 1.0 Body Dia.: 5-5/8″ Application: Goodman, Janitrol Bolt Circle Dia.: 5.15″ Voltage Compatibility: 115/208-230, 208-230, 208-240 Frame: 48Y Ins. Class: B
- Motor Bearings: Sleeve Voltage: 208-230 Motor Shaft Rotation: CCWLE Shaft Length: 3-3/4″ Motor Shaft Design: Flat Overall Length: 7-11/16″ Motor Mounting Type: Stud Country of Origin (subject to change): China
8. Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
9. VFD 110V 2.2KW 3hp Variable Frequency CNC Drive Inverter Converter for 3 Phase Motor Speed Control (2.2KW, 110V)
Feature
- IMPORTANT NOTE: this VFD is ONLY applicable to 110V three phase motor and NOT support external resistor(This function needs to be customize).Fan runs all the time even though the motor isn’t.the unit output is 400hz when you receive it ,you need to change the parameter to match your motor (if your motor is other hz)
- Input:110V 1 or 3 phase ；Output:110V 3 phase(110V motor is required)
- This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.And can be used as a motor speed control and a phase converter.Work well with the Mach 3 controller
- Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
- If there are problems in use after you receive,please don’t give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one .
10. CNC 7.5kw 7500w 220v 10HP 34a 10hp Variable Frequency Drive Inverter VFD for Spindle Motor Speed Control
Feature
- Easy PLC function can realize 16 legs of speed and inverter control function
- RS485 communication port, adopting standard international MODBUS main circuit control
- Carrier adjustable by 16KHZ, completely soundless working environment
- Various control technique by both synchronization and non-synchronization
- Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
Description
Introduction
This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently.
Technical Parameters
Input voltage:220V±15%(we also stock 110V and 380V+/-15%,please contact us for item stock)
Input Frequency: 48 to 63 Hz
Output Frequency: 0 to 400 Hz
Input Phase: 1 or 3 phase as you like
Output Phase: 3 phase
Features
1.Our item adopts the Japan Mitsubish chip;
2.PID control; advanced calculous PID closed-loop arithmetic, quick responding speed and high suitability;
3.Easy PLC function can realize 16 legs of speed and inverter control function;
4.RS485 communication port, adopting standard international MODBUS main circuit control;
5.With extremely strong anti-jamming capability;
6.Low output ratting torque, low speed running ability;
7.Carrier adjustable by 16KHZ, completely soundless working environment;
8.Broad voltage working area;
9.Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
10.Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes
Conclusion
By our suggestions above, we hope that you can found 3 Phase 10 Hp Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!
