Top 9 2004 Dash Bezel

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.

Metra 95-7406 Double DIN Installation Dash Kit for 2004-2007 Nissan Titan and 2004-2005 Nissan Armada (Silver), Install dash kit for Double DIN/ISO Radios, Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit, Painted Silver to match factory dash color, High-grade ABS plastic construction, Factory style texture. Kit Includes: Double DIN Radio Housing, Radio Housing Trim Plate, Double DIN Brackets, Double DIN Trim Plate, Six PPH-38 Screws, Six Panel Clips and Two Sided Tape

New factory OEM Nissan instrument cluster bezel. This is the plastic trim cover that goes over the speedometer and gauges. It does not come with the cluster lens itself .

Metra 99-8231 Single or Double DIN Installation Dash Kit for 2002-2006 Toyota Camry

Metra 95-6522B Double DIN Stereo Install Dash Kit for Select 2002-2005 Dodge Ram

Metra 95-7861 Double DIN Installation Dash Kit for 2003-2008 Honda Pilot

Provides pocket with recessed mounting of a din radio or ISO din radio. Rear support brackets are included. Easy installation. Fits under radio and matches factory opening perfectly. Install dash kit for single din/ISO radios. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.

Built-in 1/2-din equalizer opening. Quick conversion from 2-shaft to din. Easy-to-use Instructions. Iso and din head unit provisions. Isuzu amigo 1998-2000. Honda passport 1998-2002.

All of our gauge bezel trims are custom designed and manufactured right here in the USA. The bezel installs underneath the clear plastic, directly on top of the gauges. Basic installation instructions are included with the bezel. There may be more than one bezel for your vehicle year, so be sure to carefully check the fitment including whether you have a manual or automatic transmission, and whether or not your gauges have a tachometer (RPM gauges). If no specific fitment information is listed, then the bezel generally works for all models.